License Pool Application Alarm

The alarm is applicable only to devices supporting the Fixed License.

acLicensePoolApplicationAlarm

Alarm

acLicensePoolApplicationAlarm

OID

1.3.6.1.4.1.5003.9.10.1.21.2.0.107

Description

The alarm is sent when the device receives new SBC licenses from the OVOC License Pool and any of the following conditions exist:

■ The device needs to restart or perform a Hitless Upgrade to apply the license.
■ The device is currently undergoing a local License Key upgrade.

Default Severity

Major

Source Varbind Text

system0Mo

Event Type

communicationsAlarm

Probable Cause

New License pool

Alarm Severity

Condition

Text

Corrective Action

Major

The device has received a new SBC License from the OVOC License Pool, but requires a restart for it to be applied.

"License Pool Alarm. New license pool allocations received"

Perform one of the following actions in the OVOC License Pool to apply the new license:

■ Standalone: Reset the device.
■ HA: Apply a Hitless Upgrade or restart the device.

The device is configured to be managed by the OVOC License Pool, but it is not listed in the License Pool.

"License pool synchronization failed, Device is not listed in the License Server"

Check if the device is expected to be listed in the OVOC License Pool. If yes, then add it to the OVOC License Pool. If not, then remove the device from the License Pool.

The device is configured to be managed by the OVOC License Pool and is listed in the License Pool, but not managed by it.

"License pool synchronization failed, Device is not managed by License Server "

Check if the device is expected to be managed by the OVOC License Pool. If yes, then add it to the License Pool. If not, then remove the device from the License Pool.

The device failed to configure the parameters of the OVOC License Pool.

"Device License pool server configuration failed "

Re-send the License Pool from the OVOC License Pool to the device.

Minor
■ Standalone: The device receives a new SBC License from the License Pool Manager, but the device is undergoing a local License Key upgrade.
■ HA: The device receives a new SBC License from the License Pool Manager, but the devices are currently undergoing a local License Key upgrade.
■ Standalone: "Local License Key was loaded. License Pool requests are ignored until License Key is installed."
■ HA: "Local License Key was loaded. License Pool requests are ignored until License Key is installed.”

Do one of the following in the License Pool Manager to install the local License Key:

■ Standalone: Reset the device.
■ HA: Apply a Hitless Upgrade to the local License Key or restart the device.